Page Comparison

...

• Configurable number of modules and slots

• Up to 73 byte of process data* per direction when Datamapper is chosen

  • input data, output data, ioxs, status information (optional generic data provider, optional apdu status)

  • direction of output data is limited to 69 byte when optional generic data provider is used

  • up to 1 ms cycle time

• Up to 1434 byte of process data per direction when RPC transport is chosen

  • cycle time must not be less then 100ms

• Support for process alarms

• Support for record data (read, write), where a maximum of 1116 byte can be accessed in each direction

• Support for Redundancy (MRP) (FW Rev. 2.1)

• Dynamic module configuration (provided by connection request from PLC) for modules mapped to the cyclic channel (FW Rev. 2.1)

What functionality is not supported?

...