...
Start the Binary like shown below. The Profinet Demo Application will flush the IP configuration on the passed network interface. The Raspberry Pi is then accessable as a Profinet Device. The Application and it’s purpose is descrbed described here.
| Info |
|---|
The Application will create a data dump called “goal_cm_nvs.bin“, which represents the non-volatile storage for GOAL. This data dump contains settings like the IP configuration, Station names et cetera. |
...
To test the Raspberry Pi as a Profinet Device, you could use the Industrial Communication Explorer, provided by us. This Tool acts as an Multi-Protocol PLC and is able to configure Profinet Devices and establish AR’s with it.
...
Please refer to following Knowledge Base Article, to establish an AR using the provided GSD. You may want to try the Raspberry Pi in combination with TIA-Portal or at an industrial environment to test GOAL, the Profinet Stack and all of its features.
...
To test the Raspberry Pi as an EtherNet/IP Device, you could use the Industrial Communication Explorer, provided by us. This Tool acts as an Multi-Protocol PLC and is able to configure EtherNet/IP Devices and establish IO connections with it.
...