The emtrion SBC is a platform based on the Renesas RZN1D cpu. It consists of a CM3 core and a A7 core. For the CM3 core a firmware containing PROFINET, EtherNet/IP and EtherCAT stack is available. Ethernet ports J8 and J9 are exclusively used by the CM3 core. Ethernet ports J1 and J2 are exclusively used by linux.
24 V power adapter
USB Serial converter
a ARM (arm-none-eabi) gcc compiler (e.g. version 9.2.1 20191025)
optionally the Emtrion SBC SDK: https://cloud.emtrion.de/index.php/s/Fd7XWdmjZrBlOhI
Emtrion hardware documentation (SBC-RZN1D-Hardware_Manual_v008en.pdf)
Emtrion SDK and software documentation (sbc-rzn1d-yocto-manual_v005en.pdf)
updated device tree
port application sdk
Industrial Communication Explorer
You will need a USB serial converter connected to the device (header J5). UART speed is 115200 baud. After bootup of the device you will have the possibility to enter the uboot boot loader. From there the following steps can be executed.
Please refer to the documentation from emtrion (sbc-rzn1d-yocto-manual_v005en.pdf) on how to update the uboot boot loader (u-boot.img). This is possible using a NFS or a TFTP server. The correct version shown should be “
U-Boot 2017.01 sbc-rzn1d v01.0xp (Feb 02 2021 - 11:46:11 +0000)”.
Now you need to boot into linux (power cycle or u-boot command "boot"). The device is initially configured to use DHCP. Ethernet ports J1 and J2 are used by the linux system. To login into linux, use the account root with no password (default settings).
Please place the dtb into the /boot folder of the filesystem accessible within linux.
This step is done from the u-boot bootloader. Following commands show the procedure. Update is done using tftp here:
# set cm3_max_fw_size env set cm3_max_fw_size 0xC0000 env set CM3 yes env save # load scripts run import.uboot_script # set mode to tftp setenv lmode tftp # set ip mode to dhcp setenv ip-method dhcp # get ip address dhcp # set server ip address setenv serverip 192.168.178.103 # set nfsroot to anything, even required of tftp is used setenv nfsroot "/System/Volumes/Data/Users/Shared/nfs" # set boot for tftp mode setenv bootdir /private/tftpboot # update the cm3 run update_cm3
If successful, following log messages are shown:
SBC-RZN1D U-Boot > run update_cm3 Speed: 1000, full duplex Using dwmac.44002000 device TFTP from server 192.168.2.1; our IP address is 192.168.2.2 Filename '/private/tftpboot/cm3_fw.bin'. Load address: 0x80008000 Loading: ############# 3.4 MiB/s done Bytes transferred = 180287 (2c03f hex) SF: Detected s25fl128s_64k with page size 256 Bytes, erase size 64 KiB, total 16 MiB, mapped at 10000000 SF: 196608 bytes @ 0xe0000 Erased: OK device 0 offset 0xe0000, size 0x2c03f SF: 180287 bytes @ 0xe0000 Written: OK
The port SDK can be be used on any linux machine capable of cross compiling for the arm platform (see compiler requirements). To install the SDK create a folder and unpack the delivered archive (2021015_20210816_2_22_1_port_emtrion_sbc_CCM_ci968.zip).
To compile a profinet example application, do the following steps:
> cd projects/2015013_irj45/ac/01_pnio_io_mirror/gcc > make select No platform selected, choose a platform - OR - press <CTRL+c> and set the PLATFORM environment variable. Choose platform: [ 1] emtrion_sbc_rzn1d_a7 (gcc) [ 2] linux_x86 (gcc) Choice [1-2]: > 1 > make [CC] appl/2015013_irj45/ac/01_pnio_io_mirror/goal_appl.c [CC] appl/2015013_irj45/ac/01_pnio_io_mirror/goal_appl_http.c [CC] appl/2015013_irj45/rpc/ccm_rpc_ac.c [CC] goal/cm/goal_cm_cm.c [CC] goal/cm/goal_eth_cm.c [CC] goal/cm/goal_lm_cm.c [CC] goal/cm/goal_queue_cm.c [CC] goal/goal_alloc.c [CC] goal/goal_bm.c [CC] goal/goal_cm.c [CC] goal/goal_heap.c [CC] goal/goal_inst.c [CC] goal/goal_lm.c [CC] goal/goal_lock.c [CC] goal/goal_log.c [CC] goal/goal_main.c [CC] goal/goal_queue.c [CC] goal/goal_rb.c [CC] goal/goal_reg.c [CC] goal/goal_stat.c [CC] goal/goal_task.c [CC] goal/goal_timer.c [CC] goal/goal_util.c [CC] goal_global/goal_global.c [CC] goal_media/cm/goal_mi_mctc_cm.c [CC] goal_media/goal_ma_led.c [CC] goal_media/goal_ma_mbox.c [CC] goal_media/goal_ma_nvs.c [CC] goal_media/goal_ma_uart.c [CC] goal_media/goal_mi_dm.c [CC] goal_media/goal_mi_mctc.c [CC] goal_media/goal_mi_mctc_ram.c [CC] goal_media/goal_mi_nvs.c [CC] plat/arch/linux/goal_target.c [CC] plat/arch/linux/goal_target_cmdline.c [CC] plat/board/emtrion/sbc_rzn1d_a7/goal_target_board.c [CC] plat/drv/led/linux/led_emtrion_sbc.c [CC] plat/drv/mbox/kernel/mbox_kernel.c [CC] plat/drv/nvs/file/nvs_file_posix.c [CC] plat/drv/uart/linux/uart_linux.c [CC] protos/dd/rpc/goal_dd_rpc_ac.c [CC] protos/goal_mctc/src/goal_mctc.c [CC] protos/goal_mctc/src/goal_mctc_rb.c [CC] protos/http/goal_http_ac.c [CC] protos/lm_emit/goal_lm_emit.c [CC] protos/lm_emit/goal_lm_emit_ma_uart.c [CC] protos/lm_emit/goal_lm_emit_raw.c [CC] protos/pnio/targets/goal/goal_pnio_rpc_ac.c [CC] protos/snmp/server/goal_snmp_ac.c [CC] ext/base64/src/cdecode.c [CC] ext/base64/src/cencode.c [LD] projects/2015013_irj45/ac/01_pnio_io_mirror/gcc/build/emtrion_sbc_rzn1d_a7/goal_emtrion_sbc_rzn1d_a7.bin
If you need to specify the cross compiler, you can do so by calling make in the following way:
The resulting binary is located in the sub folder build/emtrion_sbc_rzn1d_a7. It can be transfered to the device using scp:
scp build/emtrion_sbc_rzn1d_a7/goal_emtrion_sbc_rzn1d_a7.bin firstname.lastname@example.org:
The binary can be started on the device:
root@sbc-rzn1d:~# ./goal_emtrion_sbc_rzn1d_a7.bin GOAL Start mbox: Created device mbox_2. [AC_I|goal_taskCreate:117] creating task: GOAL Timer [AC_I|goal_tgtTaskCreate:1210] task stack size: 8388608 byte [AC_I|goal_tgtTaskCreate:1252] task scheduler priority: 99 [AC_I|goal_taskCreate:160] Created task GOAL Timer with priority 100/100 and stack 0 byte sucessfully. [AC_I|goal_cmInit:220] Calculated config size of 240 in 3 modules modules [AC_I|goal_taskCreate:117] creating task: /dev/mbox_2 [AC_I|goal_tgtTaskCreate:1210] task stack size: 8388608 byte [AC_I|goal_tgtTaskCreate:1252] task scheduler priority: 54 [AC_I|goal_taskCreate:160] Created task /dev/mbox_2 with priority 50/100 and stack 0 byte sucessfully. [AC_I|goal_miMctcRamReg:148] setting media timeout to 1000: [AC_I|goal_miDmPartRegInt:275] part added to 'Read from CC', pos: 1159, len: 4296 [AC_I|goal_miDmPartRegInt:275] part added to 'Write to CC', pos: 1159, len: 4296 [AC_I|goal_snmpInitRpc:103] SNMP Application Core successfully started [AC_I|goal_taskCreate:117] creating task: GOAL Main [AC_I|goal_tgtTaskCreate:1210] task stack size: 8388608 byte [AC_I|goal_tgtTaskCreate:1252] task scheduler priority: 10 [AC_I|goal_taskCreate:160] Created task GOAL Main with priority 0/100 and stack 0 byte sucessfully. [AC_I|goal_init:181] GOAL initialized [AC_I|goal_miMctcRpcSyncLoop:1208] RPC state synchronized, running appl_setup [AC_I|goal_miMctcRpcSyncLoop:1212] configuring timeout values for peer [AC_I|goal_pnioNewAc:264] auto data mapper for DP is disabled [AC_I|goal_pnioNewAc:265] auto data mapper for APDU is disabled [AC_I|goal_pnioNewAc:339] PROFINET Application Core successfully started [AC_I|appl_setup:239] Initializing device structure [AC_I|goal_miDmPartRegInt:275] part added to 'Write to CC', pos: 0, len: 1 [AC_I|goal_miDmPartRegInt:275] part added to 'Read from CC', pos: 0, len: 1 [AC_I|goal_miDmPartRegInt:275] part added to 'Write to CC', pos: 1, len: 1 [AC_I|goal_miDmPartRegInt:275] part added to 'Read from CC', pos: 1, len: 1 [AC_I|goal_miDmPartRegInt:275] part added to 'Write to CC', pos: 2, len: 1 [AC_I|goal_miDmPartRegInt:275] part added to 'Read from CC', pos: 2, len: 1 [AC_I|goal_miDmPartRegInt:275] part added to 'Write to CC', pos: 3, len: 2 [AC_I|goal_miDmPartRegInt:275] part added to 'Read from CC', pos: 3, len: 1 [AC_I|goal_miDmPartRegInt:275] part added to 'Write to CC', pos: 5, len: 1 [AC_I|goal_miDmPartRegInt:275] part added to 'Read from CC', pos: 4, len: 2 [AC_I|goal_miDmPartRegInt:275] part added to 'Write to CC', pos: 6, len: 1 [AC_I|goal_miDmPartRegInt:275] part added to 'Read from CC', pos: 6, len: 1 [AC_I|appl_setup:456] PROFINET ready [AC_I|appl_setup:458] Configuring DD [AC_I|appl_setup:482] DD ready [AC_I|appl_httpSetup:100] setup web server [AC_I|goal_httpNewAc:954] HTTP Application Core successfully started [AC_I|appl_httpSetup:178] web server setup done [AC_I|appl_setup:504] CCM version : 2ab72cd22 [AC_I|appl_setup:505] CCM device : 1 [AC_I|appl_setup:507] CCM Serial : 01:00:00:00:8c:e2 [AC_I|goal_miMctcRpcSyncLoop:1253] local setup done [AC_I|goal_memInitDone:152] fixed memory usage: 109916/262144 bytes bytes [AC_I|goal_memInitDone:157] fixed memory usage: (42%)
The Industrial Communication Explorer is a management tool including PLC capabilities for EtherCAT, PROFINET and EtherNet/IP. Please refer to it’s documentation for installation and usage:
iRJ45 / SoM - GOAL examples
The currently delivered CM3 firmware has following restrictions:
time limited to 180 minutes
EtherCAT support is missing
LED support not fully implemented, LED colors on the hardware limit possible protocol conformance (EtherCAT, EtherNet/IP)
firmware update functionality from A7 or over Ethernet (HTTP, EtherCAT) not implemented, required to do using u-boot
Exception Log not supported
CM3 reset not possible, a restart of the A7 application requires reboot of the whole system
How to configure static IP configuration for the linux ethernet interface?
The initial ip configuration of the interface eth0 is configued in u-boot (see emtrion manual).
How to automatically start an application.
Put application into home folder /home/root under name goal_rzn1d_a7_linux.bin. After a reboot the application will be started automatically.