...
J13 - Connect “iRJ45” with “Sockel”
J8 - Connect “CS_SOURCE” with “PB2”, “PB0” for STM32F103rb Targets
J7 - Connect “RST_SOURCE” with “PD7”
Set all DIP-Switches to “OFF”
...
The STM32G071 provides an UART over USB cable. Choose the following settings:
Speed | 115200 |
Data Bits | 8 |
Stop Bits | 1 |
Parity | Odd |
Flow Control | XON/XOFF |
Application 02_profinet
The available applications are described here. Following you’ll find an example. After setting up the serial monitor and starting the debug session, the output should look like this:
...