Page Comparison

...

res = goal_eipCfgAcdOn(GOAL_TRUE);

goal_

...

eipCfgAcdConflictFallbackIp

Configure Behavior Fallback IP Configuration, if Address Conflict Detection (ACD) detects an address conflict. There are three configurations possible, where DHCP is prioritized:. The device will apply the configured IP, if it’s configured as device with static IP. If attribute 3 of the TCP/IP Class is set to DHCP, the device will start the DHCP process after a fixed timeout.

• Transit into error state and do nothing: pass ipAddress, subnetMask and gateway = 0 and flgDhcpEnable = GOAL_FALSE,

• Set fallback IP configuration: pass valid IP configuration and flgDhcpEnable = GOAL_FALSE,Get IP per DHCP: pass flgDhcpEnable = GOAL_TRUE.

...

Table: goal_eipCfgAcdConflictBehavior

uint32_t ipAddress = GOAL_NET_IPV4(192, 168, 0, 100);
uint32_t subnetMask = GOAL_NET_IPV4(255, 255, 255, 0);
uint32_t gateway = GOAL_NET_IPV4(192, 168, 0, 1);
GOAL_BOOL_T
flgDhcpEnable = GOAL_FALSE;

res = goal_eipCfgAcdConflictBehavioreipCfgAcdConflictFallbackIp(ipAddress, subnetMask, gateway, flgDhcpEnable);