...
Key | Component | Summary | Description |
|---|---|---|---|
PROFINET Master | Support of PNIO modules with input and output data | Modules which contain input and output data shall be supported by the PNIO Master. | |
Core | Add a refresh of available network interfaces | If the ICE is started before a required network interface is available (due to non plugged cable for example) there is no way of refreshing the list of available "Network Interfaces". The tool has to be restarted to visible it. The network list can be refreshed by a right click on „Network Interfaces“ and left click on „Refresh Interfaces“. | |
Core | Add Mac OS support | Add support for Mac OS X including EtherCAT proxy. | |
EtherCAT Master | Add feature SII (eprom) initialisation for EtherCAT master. | It should be possible to configure the content of the dut SII (eeprom) from the ICC. Data for the eeprom is available as binary files, generated by the design tool. Optionally reading of the EEPROM should be supported. Optionally the EEPROM content could be interpreted according to the SII specification. | |
EtherNet/IP Master | Add options for ESM states to EtherCAT master | It should be possible to directly choose each possible ESM state of the slave. Following buttons should be presented to the user:
| |
PROFINET Master | Add Alarm handling to PROFINET master | The PROFINET master should support PROFINET alarms. This requires to acknowledge received alarms from the DUT. Beside that, alarm information (diagnosis, …) should be displayed to the user. | |
PROFINET Master | Improve IOxS handling for PROFINET master | The IOxS, which are settable by the Master should automatically be set to GOOD in case of a successful connection. Still those values should be changeable as of now. | |
PROFINET Master | Process Data Tests | The PNIO Master shall allow to define basic tests of process data. Therefore the cyclic data exchange is initiated, alternating data is written and (optionally) the result is compared with the data sent. The following method shall be provided for data generation:
|
...